|Home » Free energy » Free energy generators »||Главная Доставка Контакты О нас|
The concept of a physical vacuum, as a source of energy, finds more and more supporters. The fundamental works on the nature of the "zero point" energy have been published. The space itself or the "physical vacuum" has an internal structure, hence it can serve as a source of energy if the process of changing its structure is organized.
Consider what is meant today by the term "free energy".
Energy means the ability of a system of bodies to do work. The energy of a closed system is constant. A particular device may look like a free energy generator, but do not cause confusion, since there is a known way of flowing energy into the system. For example, a solar battery emits energy received from an external source.
In other cases, the observer may not take into account the influx of energy, since he does not include energy types that go beyond the three dimensions, for example, such characteristics of space that have been little studied in the applied aspect, such as gravitation and the course of time. If a process is created whose topology is higher than three dimensions, the inflow of energy into the system is made freely from the point of view of the observer, without the costs from the external material generator. In other words, the generator of free energy fully justifies its name, because when describing it, the notions "time", "eternity", "causality" and other categories that are more relevant to philosophy and religion but not to modern physics are required.
Let us consider a number of ways of generating free energy, descriptions of which were found in the open press.
Nikola Tesla's research is not known to the majority of modern scientists and engineers. In the works on the development of wireless communications, Tesla used flat spiral coils as a secondary winding of the transformer. The magnetic field of the spiral is radial and lies in its plane. When using a spiral as a secondary winding, and a solenoid as a primary winding, the transformer has an asymmetric mutual induction: the load connection in the output circuit does not affect the power consumed in the primary winding.
Another invention Tesla is a resonant transformer. Tesla posed the question of energy conversion in a transformer in such a way that the efficiency of a resonant transformer was more than one. Working with high-frequency and high-voltage currents, Tesla used as a load single-wire terminals, that is, lamps and motors with one conductor connected to a source of a rapidly changing electric field. Such a terminal does not consume power from the primary source, since it uses a change in the field strength at the connection point to the conductor, and this point should be one of the maxima of the standing wave.
In the journal "IR", number 5.6 for 1992, describes the results of experiments Vladislav Victorovich Avramenko. The load of a single-wire line is an electric bulb or fan. The line can be made of a material with high resistance, tungsten, for example, with no heating of the wire. We can say that in such experiments the wire does not transmit energy from the generator to the load, but serves as a conductor of the information signal. In the same journal, Avramenko demonstrates a "blaster" - a generator of a plasma "bundle". A 9 Volt battery is sufficient for the initial start of the generator. Avramenko claimed that the efficiency of the created installations is more than 150 percent.
One of the famous researchers in the field of free energy was T. Brown. In a simple flat electric capacitor, Brown detected forces moving the capacitor toward the positively charged plate. Next, he described a number of ways of obtaining energy due to the electric field. In particular, the idea of ??creating asymmetry of electrostatic forces in a system of charged bodies due to a special surface shape is of interest. The descriptions in Brown's patents leave no doubt about the practical significance of his activities. As the inventor noted, the efficiency of the electrokinetic system can be one million to one, since the potential field does the action, and it does not change the state of the primary source of the field.
In 1921, the Seattle Times wrote about the structure of Alfred Hubbard. Its device includes a central core with a coil. There are eight peripheral coils around. The generator alternately generates pulses, which creates a rotating magnetic field in the central coil. The power produced in it is sufficient to self-excite the entire system.
In 1928, L. Niederschot invented an electric generator, producing about 300 watts of power. The device consisted of parts from the radio receiver, forming a oscillator 500 Kilohertz, and a non-inductive coil.
Later, in the 1970s, V. Cooper experimented extensively with bifilar non-inductive windings. He managed to use the phenomenon of induction in the absence of a magnetic field component. For compensation, a special type of winding coils (winding in two wires, a flat spiral, etc.) is used. Cooper found that specially designed windings can produce a field. The field is not shielded and has a number of characteristics common to the gravitational field. Gravity is considered by Cooper as the polarization of body atoms in the earth's gravitational field.
The works of D. Searle are known as Searl's levitating disks. It should be noted that in addition to the gravitational effect, the inventor receives a free energy output.
In the journal "Technique of Youth", number 5, 1993, in the article "The torsion field will change the world", it is told about the experiments of E. Akimov. The concept of torsion fields describes the structure of the vacuum, allowing the development of experiments to create new sources of energy, engines, communications. The action of torsion fields also explains many known bioenergetic phenomena.
The gravitational effects that occur when free-energy devices are switched on were noted by various inventors, regardless of the design of the system. In 1990, an American F. Sweet demonstrated his invention, called a vacuum triode amplifier. Barium magnets prepared in a special way were used in trigger mode. The bistable state of the magnet substance allowed the transition from one direction of the field to the other when a weak signal from an external generator was applied to the control winding. Floyd's DIY generators generated power up to 50 kW.
Floyd noted a strong anti-gravity effect, measuring once the weight reduction of the system to 90% of its normal weight. It is assumed that the energy source is the energy radiation existing everywhere in the Universe. Technically, the question of the application of the free energy of space can be formulated as the transformation of incoherent and therefore latent radiation existing at any point of space into a coherent one.
The work of the Russian scientist N. Kozyrev on the theory and experiments of "causal mechanics" demonstrates the possibility of using a time stream to obtain additional energy. It was Kozyrev who introduced the term "time density" and experimentally showed methods of changing the time density. Density depends on the intensity of irreversible processes. A powerful generator of such processes, in particular, is the biosphere of the planet, which creates diurnal and seasonal fluctuations in the chronal density. Floyd's device operated at any time of day, but the output power varied. Thus, the concept of active properties of time, put forward by Kozyrev, receives yet another experimental confirmation.
One of the schemes of the VTU includes two sets of magnets 4x6x1 inch, located along the two walls of the housing so that an attraction is created between them. Output and control windings are located between them. The axes of the output coils are parallel to the force lines of the field, and the control axes are located at an angle of 90 degrees to the lines. A permanent magnet is placed in a special solenoid and current is passed from a pulsed source. Usually a condenser is used for 6500 microfarads of 450 volts. Then the polarity of the pulse is changed and the current pulse is again given. The process is repeated many times until a lot of microcracks are formed in the magnet structure from multiple domain reorientations. Many researchers have repeated Floyd's experiments. The best results of the "conditioning" of a magnetic substance permit the transmission of an AC arc discharge directly through the ceramic. The frequency of the alternating current must correspond to the frequency of the control signal.
The issue of energy generation due to the nonlinear properties of materials, ferrites or dielectrics was considered by N. Zaev. Zaev's conception does not address the issue of space transformation, but even in such a way as "the conversion of ambient heat scattered", it is extremely important, as it provides theoretical background for fuel-free energy systems. As early as 1905 Tsiolkovsky considered this possibility: "If heat can pass from colder bodies to more heated ones, then this must have a huge, not only philosophical and general scientific significance, but, as we have seen, it is purely practical. The postulate of Clausius in its pure form, without reservations, is not justified.Gravity forces, like other reasons - the number of them is unknown, - it is violated the heat passes from the cold body to the warm, but not by itself and as a result or any exceptional conditions. "
The next of the widely known free energy systems is the Swiss electrostatic machine Bauman. The inventor named his device Thesta-Distatica (Testament), and stated that he received a description of the design and principles during meditation. From a technical point of view, the device is a modernized generator of Vimschurst. Disks are able to rotate constantly due to the forces of electrostatic interaction. The design also includes permanent magnets. A machine with a disk diameter of 20 centimeters produces about 200 watts of power, a large machine has a diameter of 2 meters and produces about 30 kW.
One of the modern developments, according to a technical solution close to the Bauman DIY machine, V. Hyde's device, is a "system generating power from an electric field." This example proves once again that a potential field, in particular an electric field, can be used as a source. A properly organized process, for example, the acceleration of the rotor of the Hyde machine, uses a potential field on the part of the path where the field work is positive.
Another development - Reed's motor - uses the energy of permanent magnets. According to the description of 1991, the design includes four discs, which are placed on 8 permanent magnets.
A similar approach was used by G. Johnson while describing the method of energy generation as "the extraction of power due to the spin energy of the electrons of a ferromagnet." In the practice of this invention, spins of unpaired electrons within permanent magnets are used to create a source of free energy by superconducting characteristics of permanent magnets and magnetic flux created by magnets. The flow is controlled and concentrated in such a way as to orient the magnetic forces to generate energy.
Another version of the device using permanent magnets is the Adams motor. The rotor with a radially oriented same pole to the outside of the permanent magnets rotates, creating induction currents in the stator windings located around the rotor in the plane of rotation. From the point of view of traditional electrical engineering, a motor generator without a closed magnetic circuit is not effective. But it is the open magnetic circuit that allows to generate power without braking the rotor. There is no phenomenon of electromagnetic induction in the full sense, there is only a magnetic induction, that is, magnetization and demagnetization of the stator core in the field of the permanent magnet of the rotor.
There is a large class of devices that use the interruption or modulation of the magnetic flux passing through the windings of the generator. These are the so-called alternatives. The output power of the alternator is determined by the magnitude of the constant magnetic field, the frequency of interruptions or modulation, the volume and characteristics of the core. In the alternator, there is no deceleration of the rotor, and the system can have an efficiency of greater than one.
In the period from 1900 to 1930, the newspapers published many materials on the DIY of G. Morey. Its demonstration systems produced 50 Kilowatt or more. The devices consisted of capacitors, coils and special electron-vacuum lamps. In 1990, the journal Magnets, published an article in which it was assumed that the Moray and Hubbard devices extracted power from the energy of the substance nuclei at an appropriate resonance.
The problem of generation of free energy in nuclear transmutations was considered in the works of B. Bolotov. Bolotov proposed and proved a new concept of controlled transmutation of matter. Today, nuclear reactors can be switched to work with light chemical elements. The energy of transformation of one substance into another can significantly exceed the energy expenditure for stimulation of the process, and the starting materials are not radioactive. Bolotov created "second generation chemistry", in which instead of water, the solvent is lithium water, that is, silicon. The dissociation of silicon under the influence of electric fields and the reaction with the formation of "acids" and "alkalis" made it possible to assume the possibility of neutralization reactions. For example, magnesium and zinc dissolved in a silicon melt, in the presence of electric fields, are converted into silicon and nickel, with the release of heat, which is confirmed experimentally.
The effect of unipolar induction, known from the time of Faraday, makes it possible to create an electromotive force when the metal rotor rotates in a transverse magnetic field. One of the known practical developments is the Bruce system. In 1991, he published test results, from which it follows that with unipolar induction, the deceleration of the rotor due to the reverse electromotive force is less apparent than in traditional generators. Therefore, the output power of the system exceeds the power required to rotate the rotor.
One of the DIY devices invented by V. Lambertson. In its arrangement, electrons receive additional energy, passing through many layers of metal-ceramic composite. The units generating 1600 W of power are designed.
In 1980, A. Chernetsky, Yu. Galkin and other researchers published the results of experiments on the creation of the so-called "self-generating discharge." A simple electric arc, connected in series in the secondary circuit of the electromagnetic transformer, leads to an increase in power in the load and a reduction in consumption in the primary circuit of the transformer. When selecting arc parameters, the current consumption decreases to zero and then changes direction, that is, the system begins to generate power, rather than consume it.
Today, the theory and practice of a self-generating electric discharge are developed well enough to build generation systems of any scale. The reason for the delay in the development of these studies is that the theory goes beyond physics. Obviously, the task of creating generators of free energy goes beyond the framework of modern materialistic physics, since ideological and philosophical questions are touched upon.
Free energy motors on magnets
To understand what a magnet motor free energy generator is and if they even work, we should first take a closer look at the specifics of energy and what a generator is capable of doing.
Free energy is a thermodynamic quantity equivalent to the capacity of a system to do work. We can obtain energy from sources that do not require an input that we have to pay for such as other forms of energy including fuel, oil, and coal. Free energy is what we can find from our local environment and use without having to suffer costs. Conventional science is out of date and needs to be upgraded to reflect our society. We utilize free energy in different ways and we do not require a paid source of energy.
The Adams Motor is an example of the use of magnetism as a free energy source. The magnets in the motor are attracted to the iron cores of the electromagnets and they rotate the drive shaft and power the motor. The moving magnets generate electrical power into the windings of the electromagnets and this is what is used to charge the battery.
The permanent magnets reach the electromagnets and the electric power is then fed to the windings and can overcome the backward pull that could potentially hinder the drive shaft’s rotation. When that power is cut off, the EMF pulse is captured and use to continue to charge the battery. Finally, additionally mounted pickup coils can generate more power with extra currents.
Charles Flynn used an electrical screening system to prevent the magnetic drag that can hinder the drive shaft rotation. Instead of using electromagnets like in the Adams Motor, he uses permanent magnets.
PPMT or Parallel Path Magnetic Technology uses permanent magnets that are controlled by a field coil in parallel magnetic circuits. Magnetic fields are steered by electrical currents. The electrical currents are not the cause of the field; they are already present and just align with the electrical current.
The magnetic energy that is used to run a motor over time does not require an outside energy source to generate electricity like the sun or water. It is running purely on the magnet arrangement. However, over time, the magnets can lose their magnetism, so they will have to be replaced at some point to continue to generate electricity. The biggest problem we are facing is trying to figure out exactly what type of magnets would work best for this free energy source.
Magnetic energy will never be 100% free. There will always be some maintenance or startup costs involved, such as when the magnets will need to be replaced. The point of the magnet motor is to provide an alternative energy source so that we do not have to solely rely on fossil fuels. The magnets are also not doing harm to the environment. The biggest issue is going to be the cost of the replacement magnets.
A magnet motor energy generator works, but the science behind this revolutionary concept needs some more developing and work through to become a reliable energy source to reduce our dependence on fossil fuels.